Product Description
Manufactured from High Tensile Case Hardened Steel MAGNI Coated (1000 Hour Neutral Salt Spray Corrosion Resistance)
IP5-2 DRIVER BIT REQUIRED TO INSTALL
The IP5-2 Sleeve Anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. The diagonal slot enables the small gaps to be pulled down and a positive clamping force to be exerted through the fixture.
10x50mm TECHNICAL DATA :-
Diameter = M8
Drill Hole Diameter = 10mm
Anchor Length = 50mm
Maximum Fixture Thickness = 6mm
Embedment Depth = 35mm
Minimum Hole Depth = 40mm
Fixture Clearance Hole = 11mm
Minimum Structure Thickness = 70mm
Tightening Torque = 20Nm
10x80mm TECHNICAL DATA :-
Diameter = M8
Drill Hole Diameter = 10mm
Anchor Length = 80mm
Maximum Fixture Thickness = 35mm
Embedment Depth = 45mm
Minimum Hole Depth = 50mm
Fixture Clearance Hole = 11mm
Minimum Structure Thickness = 70mm
Tightening Torque = 20Nm
OTHER SIZES AVAILABLE TO ORDER (SUBJECT TO MINIMUM QUANTITIES)
